AIRTAC INDUSTRIAL (MALAYSIA) SDN BHD
Lot 5019,
Jalan Pendamar 27/90,
Section 27,
40400 Shah Alam,
Selangor, Malaysia.
+603-5614 0592

ADW Series

ADW Series ADW Series Other Series Pneumatic Preparation Units


Download Files

201501091116200877.RAR (18.98 KB)
ADW-201909110117325686.PDF (1.36 MB)

Product Feature

1.The float is with lever structure. Low position enables more stable drain.

2.The bowl made of High intensity PC and covered by steel case is safer to use.

3.Double strainer guarantees the operation of the drainer.

4.Inlet with large port size prevents accumulation of particles or rust.

5.The drainage bowl with large capacity can keep more rust and dirt than general drains.

6.The drain is equipped with large float and sensitive to control.

7.The bowl with large size can store a certain amount of water which reduces discharging time and extends the service life.


Specification




Installation & Usage

1.ADW400 series are applicable to following air compressing equipments: air storage tank, dryer, filter, and piping.

2.Minimum 300mm room is required if the bottom end of above-mentioned equipments being connected with a (1/2'') joint.

3.Using a 1/2'' hand lever valve between the air compressing equipment and the inlet of ADW400 is good for maintenance.

4.The air displacement of the air compressing equipment can't be lower than 182 L/min.

5.Make sure the drain is vertical downward and the drain pipe is not bended upside.

6.Do not use acidoid or volatile oil gas (hydrochloric acid, petrol, methylbenzene, etc.) to clean the PC bowl. This may cause break.

7.Push the hexagon nut of the body to release the residual pressure before dissembling the PC bowl and metal protection case to avoid any injury or harm.
 

Ordering Code




Symbol




Reference url 3D link :https://airtac-embedded.partcommunity.com/3d-cad-models/adw-dripleg-drain-airtac?info=airtac%2Ff_r_l_combination%2Fother_series%2Fadw_series%2Fadw_dripleg_drain.prj&cwid=8026
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version