AIRTAC INDUSTRIAL (MALAYSIA) SDN BHD
Lot 5019,
Jalan Pendamar 27/90,
Section 27,
40400 Shah Alam,
Selangor, Malaysia.
+603-5614 0592

MBL,MBLC Series Cylinder

MBL,MBLC Series Cylinder MBL Aluninum Barrel Mini Mini Cylinders Pneumatic Actuators MBL,MBLC Series Cylinder MBL Aluninum Barrel Mini Mini Cylinders Pneumatic Actuators MBL,MBLC Series Cylinder MBL Aluninum Barrel Mini Mini Cylinders Pneumatic Actuators MBL,MBLC Series Cylinder MBL Aluninum Barrel Mini Mini Cylinders Pneumatic Actuators


Download Files

201602290959131157_(1).RAR (3.15 MB)
MBL-201909110208319436.PDF (4.2 MB)

Product Feature

1. Manufactured by our enterprise.

2. Riveted structure is adopted to connect front and bak cover and cylinder tube to make it credibility.

3. Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.

4. There are several modes of back cover, which makes the installation of cylinder more convenient.

5. There are cylinders and mounting accessories with several specifications for your choice.

 

Specification


Installation & Usage

 

Installation & Usage

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and  welding dregs.

4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5. The medium used by cylinder shall be filtered to 40μm or below.

6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7. To avoid side load, otherwise, piston rod will be bent and deformed and damage the thread at the end of the rod. Single-acting type can not be added in return;

8. If the cylinder is dismantled and stored for a long time, please to conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.

 

Ordering Code



Reference url 3D link : https://airtac-embedded.partcommunity.com/3d-cad-models/?info=airtac/cylinders/stainless_stell_circularity_barrel/mbl_series
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version