AIRTAC INDUSTRIAL (MALAYSIA) SDN BHD
Lot 5019,
Jalan Pendamar 27/90,
Section 27,
40400 Shah Alam,
Selangor, Malaysia.
+603-5614 0592

TN Series Twin-rod Cylinder

Previous 2 / 2 Next

TN Series Twin-rod Cylinder TN,TR Twin-rod Cylinder Twin-rod & Tri-Rod Cylinders Pneumatic Actuators


Download Files

201501090224277107.RAR (159.97 KB)
TN+TR-201909110214253656.PDF (3.68 MB)

Product Feature

1.Enterprises standard is implemented.

2.Embeded installation and fixation mode saves the installation space.

3.It is good resistance to bending and twisting moments.

4. Mounting holes on three sides facilitates multi-position mounting.

5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.

6.Standard configuration of this series has magnet and the type without magnet is not available.

 

Specification



 

Installation & Usage

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion;

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops,     oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder;

5.The medium used by cylinder shall be filtered to 40μm or below.

6.As both the front cover and piston are short, too large stroke can not be ed.

7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

8.The cylinder shall avoid redial load in operation to maintain the normal and extend service life.

9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover.

 

Ordering Code



Symbol




Reference url 3D link : https://airtac-embedded.partcommunity.com/3d-cad-models/?info=airtac/cylinders/multi_mounting_twin_rod_and_tri_rod_cylinder/tn_series/tn_series_asmtab.prj

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version